A Complete Guide on Vehicle Brakes – All you need to know

Brakes are the most important part of a vehicle. Without brakes, driving will be very dangerous. To stop your vehicle, you need to apply your brake. Braking is a very important skill that every driver should have. Over braking can cause skidding and under braking can make the vehicle run into other cars or other objects. The driver must know how to brake properly at any circumstance.

The Parts of a Vehicle Brake:

Brake is a part of the vehicle that can stop the vehicle when the driver applies it. A brake is made of two parts. One part is the disc and the other is the drum.

The disc helps reduce stopping distance by spreading out the heat and pressure that can make a car skid. The disc is connected to a drum by a brake pad. The brake pad pushes against the disc to stop the vehicle when you apply your brakes. When you apply your brakes, you can smell something similar to burning rubber, this is because of friction between your vehicle’s tires and the road surface.

Additional Read – Car Smoke – Do’s and Dont’s

How Brakes Work:

To stop your car when you push on your brakes, your brake pads need to push against the two discs in order to slow down or stop moving vehicles. When applying brakes, there will be some resistance from your vehicle’s tires against the road surface which causes a little bit of friction between them which creates heat and pressure that is applied to your discs. Heat and pressure that are created by friction can be controlled by one way valves called “anti-squeal” valves which are built into every disc rotor assembly. Anti-squeal valves will help control these heat and pressure created by friction between your vehicle’s tires against its road surface. These anti-squeal valves will release a small amount of brake fluid to your pads. The brake pads will push against the discs to slow down or stop your vehicle by pressing the pads against the discs when you apply your brakes.

The amount of pressure that is applied by your brake pads is controlled by a master cylinder and a booster. The master cylinder is connected to the brake pedal by a hydraulic line which pressurizes the master cylinder with brake fluid when you press on it. This is called “direct” braking system because there are no pumps involved in this system. When you press on your brake pedal, it will pressurize your master cylinder with brake fluid that then goes into the booster. The booster is then pushed back by this pressure and pushes out more pressure to your brake system. This is called “assisted” braking system because there are some pumps involved in this system. When you press on the pedal, it will push out more pressure to your entire braking system which pushes outward against all four of your wheels’ tires to stop them from moving and slowing down or stopping them from moving altogether that in turn slows down or stops the movement of your entire vehicle.

How Brakes Wear Out:

The pads on your vehicle’s brakes are made of a hard rubber material. The pads on your vehicle’s brakes will wear out. When this happens, you need to get your brake pads replaced. The rotors on your vehicle’s brakes can also wear out. When this happens, you need to get them replaced as well.

A Helpful Read – TROUBLESHOOTING DIM AND FAULTY HEADLIGHT

A service guide to Brakes:

A complete guide on vehicle brakes will help you understand how brakes work and how they wear out. It will also help you understand if your vehicle needs to be checked for a problem.

Brake fluid can cause harm to your eyes. The brake fluid is under pressure and it can leak from your master cylinder or booster which will cause it to spray all over your body. Always keep your hands away from the brake system when it is under pressure.

1.Get a complete Brake Inspection:

Brake pads can wear out. You need to get your brakes checked when you start hearing weird noises while driving or if you smell burning rubber or your brakes start to squeak or grind. The rotors can also wear out and need to be replaced. You need to get your brakes inspected by a mechanic when you hear strange noises while applying your brakes or if your rotors are dimpled and cracked.

2.Get New Brake Pads:

You will need new brake pads whenever you hear weird noises while driving or when you detect the smell of burning rubber from your vehicle’s brake system. The brake pads will also need to be replaced whenever they are worn out. When they are worn down, they will not fit properly on the discs anymore which can cause rubbing between them when braking which may result in damage to some components of the brake system and may lead to some accidents if not changed immediately.

3.Get New Rotors:

When you suddenly hear loud noise from your car’s braking system, it is time for your rotor replacement. The rotors will make loud noise whenever they are worn out and have reached their minimum thickness limit which means they are ready to be replaced.

4.Get New Brake Lines:

There are some brake lines that may need replacement if they get damaged or broken during any accident. Your car may need new brake lines when your vehicle’s brake fluid leaks out from your master cylinder or booster. This is because the brake fluid will not reach your brakes anymore and you will not be able to apply your brakes properly which may cause an accident.

If you are looking for an Auto repair service in Edmonton or anywhere in the Edmonton and nearby areas, we, Instant Car Repair Edmonton, can help you. We offer a complete brake inspection and replacement service. We will inspect your disc and drum brakes for any signs of wear and tear. We will also check if you need new brake pads and rotors. You can reach us over phone, email or directly over our website: